Auto Verdi - Dry Sump Oil Pump for the Volvoghini

31 038 Näkymät

Check out AutoVerdi
My instagram:

My second youtube channel (Swedish):

My Facebook page for my cars:

My company:

  • Too bad there is no way to contact you directly. You are doing an amazing job, video wise but also with the informative engineering. I honestly love your video’s, the way you talk about engineering and get happy when you see good engineering makes my day! Keep up the good work, amazing video’s, really interesting and very educative!😁😁

    Bart SelterBart SelterUukausi sitten
  • It is very hard to buy used dry sump pump.

    Jarek NowakJarek NowakUukausi sitten
  • $$$$$ 😍

    Leanin LeonLeanin LeonUukausi sitten
  • Sweden has been known for pumps of a disparate variety of applications since the 60s. ;-)

    interestinginterestingUukausi sitten
  • Visst fina pumpar, men hade grabbarna en bild på Gunde Svan upphängd någonstans i verkstaden?

    The_Hate_InsideThe_Hate_InsideUukausi sitten
  • I'm thinking of getting a dry sump system for my turbo volvo redblock.

    FromZeroToDriftHeroFromZeroToDriftHeroUukausi sitten
  • Very impressive. The LS oil pan you showed actually looks a lot like the Dailey Engineering/VAC motorsports oil pan I had for my S85 V10. The design and quality makes me wonder if it's AutoVerdi that manufactures it for them.

    DriftworksDriftworksUukausi sitten
    • No, Dailey makes it in house in USA, Auto Verdi system is lets say inspiration from Dailey :D. But this system were seen on some rally kitcars in 2000´s..

      Petr ZemPetr ZemUukausi sitten
  • Impressive quality and workmanship in those pumps! Thanks for this tour Peter!

    Geoff SeeleyGeoff SeeleyUukausi sitten
  • Austin Powers already knew that the best pumps are swedish made

    lionofzion81lionofzion81Uukausi sitten
  • You also find AutoVerdi connectingrods in Ken Duttweiler built landspeed recordholding Chevrolet engine.

    ElCamino439ElCamino439Uukausi sitten
  • Auto Verdi has a good reputation! Great that you are show casing Swedish manufacturers. And love the accent too lol, "Partsh"

    Andrew GallagherAndrew GallagherUukausi sitten
  • Wery cool to see these parts and shops in detail. Thank you👍

    TheReinoPaasonenTheReinoPaasonen2 kuukautta sitten
  • Isn't Lambo engine already dry sump?

    kize32kize322 kuukautta sitten
    • This one appears to be. At the end where he was pointing out areas to connect the lines, I'm pretty sure those are suction passages.

      Keith MacDonaldKeith MacDonaldUukausi sitten
  • Hejhej hembyn!

    KebbZKebbZ2 kuukautta sitten
  • Cool shop tour. But i left wondering that will there be enough oil for that sweet K24 when that VTEC kicks in yo?

    hodillachodillac2 kuukautta sitten
  • Yes people... Pay close attention @6:55... more directly @7:00... The timed wood drift key slots... that is critical.... pending how many pumps are in line, of that type of lobed pump system... if not, you will have surging and or pulses of under pressure and worst of all, over pressure.... I had another brand of pump that was for a machine collection system, that would vibrate, and rip itself to shreds in very short time, and this machine was every bit the cost of $200K USD.. and we couldn't figure out what was going on each time it failed... until the service call for a new inline pump came up to be replaced the replacement unit a year later.. and all the vibrations went away, the destructive pulsing was gone... .. If each pf the pumps is its own system, or is a low RPM's, then not a big deal, but if either of the intake or output side share feeds channels, Make sure these lobes are timed... Kinda like how they showed at this time stamp @7:00... good luck

    Dru BradleyDru Bradley2 kuukautta sitten
  • Where gonna miss you when you are traveling back to your own Planet

    rudi knapenrudi knapen2 kuukautta sitten
  • När åker du tillbaks till Dubai?

    November rainNovember rain2 kuukautta sitten
    • Vet ej!

      PeterBjorckPeterBjorck2 kuukautta sitten
  • Why does that press sound like chewbaca?

    Johnathan DoeJohnathan Doe2 kuukautta sitten
  • Very nice motorsport parts manufacturing in Sweden. The women are also pretty too.... maybe I should move to Sweden

    Timbo S550Timbo S5502 kuukautta sitten
  • this is the pump @rob dahm needs

    TheDroidKillaTheDroidKilla2 kuukautta sitten
  • Rob Dahm needs to get one of those pumps if he doesn't already. Supposedly he had a dry sump oil pump failure at his first half mile event with the 4 rotor. I hope the ecu shut it down before any damage was done!

    wheeln 24/7wheeln 24/72 kuukautta sitten
  • Exited to see end result of Volvoghini :)

    19RagnarökBefriareOchDöd8819RagnarökBefriareOchDöd882 kuukautta sitten
  • I wonder if the US racers give credit to the Swedish engineers? Good ol usa lol

    MK1 Cortina TonyMK1 Cortina Tony2 kuukautta sitten
  • I have said this before, but Volvo's are the best car ever made. I have one sitting in my garage right now.

    phiberoptickphiberoptick2 kuukautta sitten
    • Why do you keep saying it when it clearly isn't true? There are many cars just as well-built as Volvos and many that are better-built. Your having one in your garage sure doesn't make them the best cars ever made! He's getting parts for his *Lamborghini engine* , didn't you notice that *nothing whatsoever* in this video had anything to do with the quality of Volvos?

      Nick TurnerNick Turner2 kuukautta sitten
  • Oily meow. xD

    Rick CaveRick Cave2 kuukautta sitten
  • Most important part of a true racecar

    Bob RossBob Ross2 kuukautta sitten
  • I wish you had access to the technology and parts available now for the supra and documented it like this. Dream series.

    Peter PhilipsePeter Philipse2 kuukautta sitten
    • Almost same methods/techno in every car.

      Jarek NowakJarek NowakUukausi sitten
  • Tack Peter 👍🏻

    Petter !Petter !2 kuukautta sitten
  • Sweden makes all the best pumps.

    djambrosiadjambrosia2 kuukautta sitten
    • Insert random Austin Powers Swedish-made-penis-enlarger-pump-joke her...

      Turd FergusonTurd Ferguson2 kuukautta sitten
  • Another great video. The products are so high spec, so well made, such great engineering and quality the all way thru. I love when you make these tour videos

    gafrersgafrers2 kuukautta sitten
  • Thanks for the tour, I learnt a lot! Lovely looking engineering.

    GordonjSmith1GordonjSmith12 kuukautta sitten
  • There is so much cool stuff for motorsport thats made in sweden, its ridiculous.

    Anders HaugenAnders Haugen2 kuukautta sitten
  • Great. Mechanics Porn..

    Blinka BotBlinka Bot2 kuukautta sitten
  • That oilpan for Revline Racing's billet K24-engine looks great!

    Turd FergusonTurd Ferguson2 kuukautta sitten
  • Jesus that sump is a thing of beauty!

    rompduderompdude2 kuukautta sitten
  • Just beautiful

    The Magic RoundaboutThe Magic Roundabout2 kuukautta sitten
  • Another intresting video! Thanks for bringing us with you on this tour 😀👍

    Backmans GarageBackmans Garage2 kuukautta sitten
  • A Lambo V10 engine highly customized revving @ 9000 rpm in a Volvo. If I had that; I probably could not drive it. I would be rolling on the floor laughing my ass off after 5 minutes.

    Marc DuchesneMarc Duchesne2 kuukautta sitten
  • How much do you think they would want for some 2jz rods?

    GHOSTGHOST2 kuukautta sitten
    • @Nick Turner it's about 190 euros plus vat but it depends. what is the model of the connecting rod

      pepzie27pepzie272 kuukautta sitten
    • If you were serious you'd have asked them, or one of their retailers, directly, they're not hiding and they're sure not going to be looking for customers in TY comments.

      Nick TurnerNick Turner2 kuukautta sitten
    • about 190 euros plus VAT

      pepzie27pepzie272 kuukautta sitten
  • Peter you are class

    RiyazatronRiyazatron2 kuukautta sitten
  • Sånahär videos gör en lite patriotisk. Snyggt jobbat Auto-verdi 🇸🇪❤️💪🏻

    Viktor TegelbergViktor Tegelberg2 kuukautta sitten
    • 👍👍👍

      pepzie27pepzie272 kuukautta sitten
  • Only The best is good enough for The old Volvo!

    MikesRandomCarsMikesRandomCars2 kuukautta sitten
  • I seriously enjoyed this video, very much appreciated. Superb quality, now I know where RCM get there kit from 👍👍👍

    The streetsThe streets2 kuukautta sitten
  • The strive he has for quality in his builds are so fukking insane. Any build by Peter is a work of art no doubt about it.

    Z4GZ4G2 kuukautta sitten
    • I wish we had these videos when the supra was being built

      Peter PhilipsePeter Philipse2 kuukautta sitten
  • RCM = Roger Clark Msport

    E WE W2 kuukautta sitten
  • That pump is probably so expensive, it would probably pay of my mortgage.

    Lucky GooseLucky Goose2 kuukautta sitten
    • Maybe in Uganda

      J HJ H2 kuukautta sitten
  • snyggt har en pump från verdi på in som ar funkat klockrent sen dag 1

    Mac 740 T5Mac 740 T52 kuukautta sitten
  • Insane craftsmanship its purely beauty and pride in this

    Lévesque JpLévesque Jp2 kuukautta sitten
  • ‘Very nice’ for Peter to take us on the Auto Verdi shop tour 👍

    James TJames T2 kuukautta sitten
  • Allen bolts.

    KallekofotKallekofot2 kuukautta sitten
  • 0:32

    Jeff PhillipsJeff Phillips2 kuukautta sitten
  • Excellent really enjoyed the information there

    Andy MitchellAndy Mitchell2 kuukautta sitten
  • Need that company to build me a oil pump in he future if I don’t have a CNC machine and my own schematics by then

    AndrewKidd14145AndrewKidd141452 kuukautta sitten
  • Nice video amigo 😀👍

    ManufalketManufalket2 kuukautta sitten
  • Nice!

    IngeBallIngeBall2 kuukautta sitten
  • All those beautiful parts, what an amazing manufacturer. Thank you for the tour.

    Brian BobBrian Bob2 kuukautta sitten
  • Öhhhh??? va fan är det här. Lär dig mecka själv sopa.. Patetiskt

    Joachim HenrixonJoachim Henrixon2 kuukautta sitten
    • Ja det finns dom som haft en dålig uppväxt och låter det gå ut över andra tyvärr

      pepzie27pepzie272 kuukautta sitten
    • Herregud🙄

      19RagnarökBefriareOchDöd8819RagnarökBefriareOchDöd882 kuukautta sitten
    • Dåligt trollande är dåligt.

      Jonas LarssonJonas Larsson2 kuukautta sitten
    • Du får gärna visa dina byggen om dom nu är så jävla mycket bättre!

      Alfred PålssonAlfred Pålsson2 kuukautta sitten
    • Wtf ska han börja bygga pumpar nu också lmao

      Alex StrömbergAlex Strömberg2 kuukautta sitten
  • Such a cool Company and Stefan and Steen are great guys 👌🏼

    ASH TECHASH TECH2 kuukautta sitten
  • Nice video... good to see that the Swedish industries are alive and well!!!

    Miguel NetoMiguel Neto2 kuukautta sitten
  • @robdahm need this

    Anders GrundbergAnders Grundberg2 kuukautta sitten
    • Give it to him for Christmas

      Bob RossBob Ross2 kuukautta sitten
    • Thought exactly the same thing. 😂 It's just a matter of letting him know they exist 💪🏻

      Viktor TegelbergViktor Tegelberg2 kuukautta sitten
    • team daddy dahm checking in

      nopea huolinopea huoli2 kuukautta sitten
    • Rob needs a lot

      Alex StrömbergAlex Strömberg2 kuukautta sitten
    • Yeah, was just about to comment this when I saw the video

      NotnaRedNotnaRed2 kuukautta sitten
  • Cant wait to see it when its rdy 👌

    Koirasd Illuminati oyKoirasd Illuminati oy2 kuukautta sitten
  • 3:29 200 MM of teflon?? MIcrometers maybe?

    smitthonesmitthone2 kuukautta sitten
    • 0.02mm

      Jonas LarssonJonas Larsson2 kuukautta sitten
    • @kasta postgård tried to listen twice was not clear. For sure NOT 200 mm....

      smitthonesmitthone2 kuukautta sitten
    • I think he said a 200th mm

      H8H82 kuukautta sitten
    • He says two hundreds of a mm.

      kasta postgårdkasta postgård2 kuukautta sitten